 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| EVERLIGHTELECTRONICS CO.,LTD. Technical Data Sheet TOP View LEDs (Preliminary) 67-21B UYC/S530-XX/TR8 eatures PLCC-2 package. High flux output. High current capability. White package. Optical indicator. Colorless clear window. Ideal for backlight and light pipe application. Inter reflector. Suitable for automatic placement equipment. Suitable for reflow and wave solder processes. Available on tape and reel (12mm Tape). Pb-free. The product itself will remain within RoHS compliant version. Descriptions The 67-21B series is available in soft orange, red and yellow. Due to the package design, the LED has wide viewing angle and optimized light coupling by inter reflector. This feature makes the 67-21B series LED ideal for light pipe application. The low current requirement makes this device ideal for portable equipment or any other application where power is at a premium. Applications Automotive: indoor and outdoor lighting. Indicator and backlight for audio and video equipment. Indicator and backlight in office and family equipment. Flat backlight for LCD's, switches and symbols. Light pipe application. General use. Device Selection Guide Chip Material AlGaInP Emitted Color Brilliant Yellow Lens Color Water Clear Everlight Electronics Co., Ltd. Device No. : http://www.everlight.com prepared date:23-Sep-2005 Rev. 1 Page: 1 of 9 Prepared by:Forrest EVERLIGHTELECTRONICS CO.,LTD. 67-21B UYC/S530-XX/TR8 Package Dimensions C L 2.2 0.1 2.8 0.2 + Polarity - C L 3.25 0.2 3.0 For reflow soldering (propose) Notes: 1.All dimensions are in millimeters 2.Tolerances Unless Dimension = 0.1mm Everlight Electronics Co., Ltd. Device No. : http://www.everlight.com prepared date:23-Sep-2005 Rev. 1 Page: 2 of 9 Prepared by:Forrest EVERLIGHTELECTRONICS CO.,LTD. 67-21B UYC/S530-XX/TR8 Absolute Maximum Ratings (Ta=25 Parameter Reverse Voltage Forward Current Operating Temperature Storage Temperature Electrostatic Discharge (HBM) Power Dissipation Peak Forward Current(Duty 1/10 @ 1KHz) ) Symbol VR IF Topr Tstg ESD Pd IFP Tsol Rating 5 25 -40 ~ +85 -40~ +100 2000 60 60 Reflow Soldering : 260 V mW mA for 10 sec. for 3 sec. Unit V mA Soldering Temperature Hand Soldering : 350 Electronic Optical Characteristics (Ta=25 Parameter Symbol Rank A3 A4 Luminous Intensity Iv A5 A6 Viewing Angle Peak Wavelength Dominant Wavelength Spectrum Radiation Bandwidth Forward Voltage Reverse Current ): Min. 110 135 170 220 ------------Typ. 185 220 270 365 60 591 589 Max. --------mcd --------------------deg nm nm IF=20mA IF=20mA IF=20mA IF=20mA Unit Condition 2 1/2 p d ------------- ----VF IR --------- ----1.7 ----- 15 2.0 ----- ----2.4 10 nm V A IF=20mA IF=20mA VR=5V Everlight Electronics Co., Ltd. Device No. : http://www.everlight.com prepared date:23-Sep-2005 Rev. 1 Page: 3 of 9 Prepared by:Forrest EVERLIGHTELECTRONICS CO.,LTD. 67-21B UYC/S530-XX/TR8 Typical Electro-Optical Characteristics Curves Everlight Electronics Co., Ltd. Device No. : http://www.everlight.com prepared date:23-Sep-2005 Rev. 1 Page: 4 of 9 Prepared by:Forrest EVERLIGHTELECTRONICS CO.,LTD. 67-21B UYC/S530-XX/TR8 Label explanation CAT: Luminous Intensity Rank HUE: Dom. Wavelength Rank REF: Forward Voltage Rank Reel Dimensions Note: The tolerances unless mentioned is Everlight Electronics Co., Ltd. Device No. : 0.1mm ,Unit = mm Rev. 1 Page: 5 of 9 http://www.everlight.com prepared date:23-Sep-2005 Prepared by:Forrest EVERLIGHTELECTRONICS CO.,LTD. 67-21B UYC/S530-XX/TR8 Carrier Tape Dimensions: Loaded quantity 2000 PCS per reel. Note: The tolerances unless mentioned is + Moisture Resistant Packaging Everlight Electronics Co., Ltd. Device No. : Polarity 0.1mm Unit = mm Label Aluminum moisture-proof bag Desiccant Label http://www.everlight.com prepared date:23-Sep-2005 Rev. 1 Page: 6 of 9 Prepared by:Forrest EVERLIGHTELECTRONICS CO.,LTD. 67-21B UYC/S530-XX/TR8 Reliability Test Items And Conditions The reliability of products shall be satisfied with items listed below. Confidence level 90% LTPD 10% No. 1 Items Reflow Soldering Test Condition Temp. : 260 5 Min. 5sec. H : +100 15min 5 min L : -40 15min H : +100 5min 10 sec L : -10 5min Temp. : 100 Temp. : -40 IF = 20 mA 85 / 85%RH Test Sample Hours/Cycles Size 6 Min. 300 Cycles 22 PCS. Ac/Re 0/1 2 Temperature Cycle 22 PCS. 0/1 3 Thermal Shock High Temperature Storage Low Temperature Storage DC Operating Life High Temperature / High Humidity 300 Cycles 1000 Hrs. 1000 Hrs. 1000 Hrs. 1000 Hrs. 22 PCS. 0/1 4 5 6 7 22 PCS. 22 PCS. 22 PCS. 22 PCS. 0/1 0/1 0/1 0/1 Everlight Electronics Co., Ltd. Device No. : http://www.everlight.com prepared date:23-Sep-2005 Rev. 1 Page: 7 of 9 Prepared by:Forrest EVERLIGHTELECTRONICS CO.,LTD. 67-21B UYC/S530-XX/TR8 Precautions For Use 1. Over-current-proof Customer must apply resistors for protection, otherwise slight voltage shift will cause big current change ( Burn out will happen ). 2. Storage 2.1 Do not open moisture proof bag before the products are ready to use. or less and 90%RH or less. 2.2 Before opening the package: The LEDs should be kept at 30 2.3 After opening the package: The LED's floor life is 1 year under 30 deg C or less and 60% RH or less. If unused LEDs remain, it should be stored in moisture proof packages. 2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the storage time, baking treatment should be performed using the following conditions. Baking treatment : 60 5 3. Soldering Condition 3.1 Pb-free solder temperature profile for 24 hours. 3.2 Reflow soldering should not be done more than two times. 3.3 When soldering, do not put stress on the LEDs during heating. 3.4 After soldering, do not warp the circuit board. Everlight Electronics Co., Ltd. Device No. : http://www.everlight.com prepared date:23-Sep-2005 Rev. 1 Page: 8 of 9 Prepared by:Forrest EVERLIGHTELECTRONICS CO.,LTD. 67-21B UYC/S530-XX/TR8 4.Soldering Iron Each terminal is to go to the tip of soldering iron temperature less than 350 for 3 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder. 5.Repairing Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing. EVERLIGHT ELECTRONICS CO., LTD. Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Tucheng, Taipei 236, Taiwan, R.O.C Tel: 886-2-2267-2000, 2267-9936 Fax: 886-2267-6244, 2267-6189, 2267-6306 http://www.everlight.com Everlight Electronics Co., Ltd. Device No. : http://www.everlight.com prepared date:23-Sep-2005 Rev. 1 Page: 9 of 9 Prepared by:Forrest |
Price & Availability of 67-21BUYC-S530-A3-TR8
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |